Verge Wizard :: Dry Verge Systems

Save time and money with the Verge Wizard dry fix verge system - designed to provide a quick and easy, great looking solution for finishing the verge of a roof.

The system is available in grey and brown and manufactured from UV stable high quality polypropylene.

Installation is quick and easy via the ‘flex and clip’ installation method and no special tools are required making it ideal for rapid refurbishment work.

Verge Wizard offers a sleek, stylish finish that is highly robust and practically maintenance free. Manufactured in the UK to high quality standards in a modern, efficient factory.

Key Features:


fast_symbol.pngFast flex and clip installation method


easy_symbol.pngEasy locate
starter unit


weather_symbol.pngAll weather




solid_symbol.pngSolid and




gutter systems


Available in black, grey and brown

black.png grey.png brown.png 

Roofline magic

  • Universal – can be used on left and right hand verges
  • Fit and forget reliability
  • Unique modern design
  • Fast flex and clip installation
  • Quick, easy fit starter unit
  • Meets current building regulations
  • Mechanically fixed
  • Batten gauge range: 260 - 355mm
  • Roof pitch range: 15 - 55°
  • Manufactured in the UK

Product range


Verge unit


Round ridge cap


Angled ridge cap


Starter unit


Batten end clip

Product Codes

Item Grey Brown Black
Verge unit DVUGR60 DVUBR60 DVUBL60
Starter unit DVUSGR30 DVUSBR30 DVUSBL30
Angled ridge cap DVRCAGR10 DVRCABR10 DVRCABL10
Round ridge cap DVRCRGR10 DVRCRBR10 DVRCRBL10
Batten end clip DVBEC50* DVBEC50* DVBEC50*

* Please note the batten end clip is stainless steel and not coloured

4 simple steps for a quick and easy installation:

For new build – ensure tiling battens are extended 30mm beyond the gable wall or bargeboard. Fix a batten end clip to the end of every batten using a 40mm (min) x 3.25mm ring shank nail.
For refurbishment – it is recommended that all existing mortar is removed. Run a suitable batten from eaves to ridge, below the undercloak on the gable wall or directly to the bargeboard.

Stage 1

Fix the starter plate to the gable wall or bargeboard, ensuring the location guide is on top of the tile.


Stage 1

Stage 2

Fix the fi rst Verge Wizard in place by clipping over the starter plate and ensuring the top of the verge unit is under the tile above. Fix into position through the batten end clip or running batten depending on your project.


Stage 2

Stage 3

For each successive Verge Wizard simply flex and clip over the verge below and slide up to the tile toe. Fix into position through the batten end clip or running batten depending on your project. Continue this process until you reach the ridge.


Stage 3

Stage 4

Flex and clip the ridge cap over the ends of both units, central to the ridge tile, and securely screw to the ridge batten


Stage 4